|
Стопора с шарикоподшипниками |
Стопорные аксессуары |
Подставки |
Триггерные стопора |
Поворотные основания тригерных стопоров |
Удерживающие основания |
Палистпасы |
Шкивы |
Шкивы для больших яхт |
Шкивы для высоких нагрузок |
Узкие фаловые и рулевые шкивы |
Направляющие пакеты ESP |
Малые нааправляющие пакеты |
Средние направляющие пакеты |
Большие направляющие пакеты |
Клювы и каретки спмнакер гика |
Талрепы |
Оковки |
Обушки |
Нержавеющие мочки |
Петли (LOUPS) |
Аксессуары |
Подъемные потолочные тали
Complementary Hardware > Cam Cleat Accessories
Use these accessories to adapt our cleats for many applications. Whether you need to clean up your cockpit controls with color-coding, or lead a line cleanly to the cleat, we've got the perfect accessory for you.
Lightweight cam fairleads mount either aft or ahead of the cam. Mounted behind the cleat, they allow engagement and release up to 45° to the side of the cleat. The stainless tubes protect lines and the smooth contours prevent hang-ups. Wire fairleads maintain a low profile while holding the line close to the cleat. The X-treme Angle Fairlead allows releasing and recleating at angles up to 90° to the cleat. This sets it apart from other fairleads where line uncleats at extreme angles, and can't recleat without centering the line. The low-friction stainless bail provides a bullet-proof turning point. Perfect for traveler and cabintop controls or deck cleats— a must for the new Laser" deck cleating system.
Low-profile top-mounted flairleads can also be used to guide lines. They feature stainless wearguards for long life and are available in various colors for color-coding your cams. We offer a wide range of eyestraps to hold line at the cleat and to provide fair leads.
 |
1. Flairleads - Lightweight, fiber-reinforced flairleads feature stainless wearguards for long life and are available 'in various colors for color-coding your cams.
|
 |
2. Fairleads - Reversible, fiber-reinforced plastic fairleads have stainless tubes to protect lines. They allow even lines at acute angles to be easily engaged in cams.
|
 |
3. Cam Adapter Plate - The 438 adapter plate is perfect for use on masts and booms. It raises the cleat off the mast to improve the cleating angle and control.
|
 |
4. Patented Pawl Geometry - Unique pawl design ensures that the greatest number of teeth hold lines of all sizes.
|
 |
5. Cam Caps - Color code your cams with replaceable cam caps. These fit over the standard caps on standard and micro cleats.
|
 |
New X-treme Angle Fairland
Cleat and uncleat at angles up to 90 degrees
Stainless steel loop provides low-friction turning post
Base plate ensures optimal cleating height
Ideal for Laser" outhaul/ cunningham controls
Use with risers and angled wedges |
Cams
| Part No. |
Description |
Height |
Length |
Width |
Weight |
Line  min - max |
Fastener spacing |
Safe working load |
Breaking strength |
Pawls |
| in | mm | in | mm | in | mm | oz | g | in | mm | in | mm | Ib | kg | Ib | kg |
| 150 | Cam-Matic® * | 13/16 | 30 | 29/16 | 65 | 11/4 | 32 | 21/2 | 71 | 1/8-1/2 | 3-12 | 11/2 | 38 | 300 | 136 | 750 | 340 | Aluminum |
| 280 | Offshore Cam-Matic® *** | 11/4 | 32 | 33/8 | 85 | 11/2 | 38 | 51/4 | 148 | 1/4-5/8 | 6-16 | 21/16 | 52 | 500 | 227 | 1000 | 454 | Aluminum |
| 338 | Micro Cam-Matic® ** | 3/4 | 20 | 17/8 | 48 | 15/16 | 24 | 13/16 | 23 | 1/8-1/4 | 3-6 | 11/16 | 27 | 200 | 91 | 400 | 181 | Aluminum |
| 365 | Carbo-Cam® * | 13/32 | 28 | 29/16 | 65 | 11/4 | 32 | 11/2 | 42 | 1/8-3/8 | 3-10 | 11/2 | 38 | 200 | 91 | 500 | 227 | Plastic carbon-matrix |
| 412 | Double Cam-Matic® **** | 21/16 | 53 | 317/32 | 81 | 11/4 | 32 | 41/2 | 126 | 5/16-3/8 | 8-10 | 27/16 | 62 | 500 | 227 | 750 | 340 | Aluminum |
| 423 | Micro Carbo-Cam® ** | 13/16 | 20 | 17/8 | 48 | 15/16 | 24 | 9/16 | 16 | 1/8-1/4 | 3-6 | 11/16 | 27 | 150 | 68 | 300 | 136 | Plastic carbon-matrix |
* - #10 (5 mm) FH fasteners
** - #8 (4 mm) RH fasteners
*** - 1/4" (6 mm) FH fasteners
**** - #10 (5 mm) TH fasteners
Complementary Hardware > Accessories
Micro
Micro
| Part No. |
Description |
Height above cam |
Height |
Length |
Width |
Weight |
Fastener Spacing |
Fits |
| in | mm | in | mm | in | mm | in | mm | oz | g | in | mm |
| 281 | Micro eyestrap | 1/2 | 12 | — | — | 17/16 | 36 | 7/16 | 11 | .16 | 4.5 | 11/16 | 27 | 338/423 |
| 284 | Micro wire fairlead | — | — | 13/16 | 21 | 17/8 | 48 | 15/16 | 24 | .24 | 7 | 11/16 | 27 | 338/423 |
| 293 | Flat micro cam riser | — | — | 5/8 | 16 | 17/8 | 48 | 15/16 | 24 | .5 | 14 | 11/16 | 27 | 338/423 |
| 294 | 15° Angled micro cam riser | — | — | 3/4 | 19 | 17/8 | 48 | 15/16 | 24 | .75 | 21 | 11/16 | 27 | 338/423 |
| 297 | Micro cam wedge kit | — | — | — | — | 17/8 | 48 | 15/16 | 24 | .16 | 5 | 11/16 | 27 | 338/423 |
| 329 | Micro fairlead | 9/16 | 14 | — | — | 17/16 | 37 | 2 | 51 | .5 | 14 | 11/16 | 27 | 338/423 |
| 372 | Micro X-treme angle fairlead | 7/8 | 22 | — | — | 15/16 | 33 | 2 | 51 | 1 | 28 | 11/16 | 27 | 338/423 |
| 424 | Micro flairlead | 7/16 | 11 | — | — | 15/8 | 41 | 5/8 | 16 | .13 | 3.5 | 11/16 | 27 | 338/423 |
Standard
Standard
| Part No. |
Description |
Height above cam |
Height |
Length |
Width |
Weight |
Fastener Spacing |
Fits |
| in | mm | in | mm | in | mm | in | mm | oz | g | in | mm |
| 137 | Eyestrap | 3/4 | 19 | — | — | 2 | 51 | 9/16 | 14 | .32 | 9 | 11/2 | 38 | 150/365 |
| 145 | Cam wedge kit | — | — | — | — | | | | | 1 | 28 | 11/2 | 38 | 150/365 |
| 201 | Low-profile eyestrap | 9/8 | 10 | — | — | 17/8 | 48 | 7/16 | 11 | .16 | 4.5 | 11/2 | 38 | 150/365 |
| 295 | Flat cam riser | — | — | 1 | 28 | 29/16 | 65 | 11/4 | 32 | 1.5 | 38 | 7/8 | 22 | 150/365 |
| 296 | 15° Angled cam riser | — | — | 1 | 25 | 29/16 | 65 | 11/4 | 32 | 1.25 | 35 | 11/2 | 38 | 150/365 |
| 298 | Wire fairlead | — | — | 11/4 | 32 | 29/16 | 65 | 11/4 | 32 | .5 | 14 | 11/2 | 38 | 150/365 |
| 328 | Fairlead | 11/16 | 17 | — | — | 2 | 51 | 29/16 | 65 | 1 | 28 | 11/2 | 38 | 150/365 |
| 375 | X-treme angle fairlead ± | 15/16 | 24 | — | — | 113/16 | 46 | 29/16 | 65 | 2 | 56 | 11/2 | 38 | 150 |
| 380 | X-treme angle fairlead ± | 15/16 | 24 | — | — | 113/16 | 46 | 29/16 | 65 | 2 | 56 | 11/2 | 38 | 365 |
| 425 | Flairlead | 5/8 | 16 | — | — | 23/16 | 56 | 13/16 | 21 | .25 | 7 | 11/2 | 38 | 150/365 |
| 431 | Colored cam caps | blue/yellow/green/black/red | 150/280/338/365/423 |
| 438 | Cam adapter plate | — | — | 9/16 | 14 | 3 | 76 | 17/16 | 36 | 2.5 | 71 | 11/2 | 38 | 150/365 |
± - Max line : 3/8" (10 mm)
Offshore
 282 |
 283 |
Offshore
| Part No. |
Description |
Height above cam |
Height |
Length |
Width |
Weight |
Fastener Spacing |
Fits |
| in | mm | in | mm | in | mm | in | mm | oz | g | in | mm |
| 282 | Large eyestrap | 15/16 | 23 | — | — | 213/16 | 71 | 3/4 | 19 | .8 | 23 | 21/16 | 52 | 280 |
| 283 | Offshore cam wedge kit | — | — | — | — | 33/8 | 85 | 11/2 | 38 | 1.5 | 43 | 21/16 | 52 | 280 |
Kits
 315 |
 388 |
 316 |
 427 326 |
 390 327 |
 358 357 |
 389 356 |
Kits
| Part No. |
Description |
Cam |
Wedge |
Fairlead |
Weight |
| oz | g |
| Micro |
| 315 | Micro Carbo-Cam® | 423 | 297 | 284 | 7/8 | 26 |
| 358 | Micro Carbo-Carrf/fairlead | 423 | — | 329 | 11/8 | 32 |
| 388 | Micro Cam-Matic® | 338 | 297 | 284 | 11/8 | 32 |
| 389 | Micro Cam-Matic®/fairlead | 338 | — | 329 | 13/8 | 39 |
| 390 | Micro Cam-Matic®/wire fairlead | 338 | — | 284 | 1 | 28 |
| 427 | Micro Carbo-Cam®/wire fairlead | 423 | — | 284 | 3/4 | 22 |
| Standard |
| 316 | Cam-Matic® | 150 | 145 | 137 | 31/4 | 93 |
| 326 | Carbo-Cam®/wire fairlead | 365 | — | 298 | 2 | 54 |
| 327 | Cam-Matic®/wire fairlead | 150 | — | 298 | 3 | 85 |
| 356 | Cam-Matic®/fairlead | 150 | — | 328 | 4 | 114 |
| 357 | Carbo-Cam®/fairlead | 365 | — | 328 | 3 | 80 |
Стопора с шарикоподшипниками |
Стопорные аксессуары |
Подставки |
Триггерные стопора |
Поворотные основания тригерных стопоров |
Удерживающие основания |
Палистпасы |
Шкивы |
Шкивы для больших яхт |
Шкивы для высоких нагрузок |
Узкие фаловые и рулевые шкивы |
Направляющие пакеты ESP |
Малые нааправляющие пакеты |
Средние направляющие пакеты |
Большие направляющие пакеты |
Клювы и каретки спмнакер гика |
Талрепы |
Оковки |
Обушки |
Нержавеющие мочки |
Петли (LOUPS) |
Аксессуары |
Подъемные потолочные тали
|