Error processing SSI file

Ball Bearing Cam Cleats | Cam Cleat Accessories | Cam Bases | Trigger Cleat | Trigger Cleat Swivel Base | Stand-up Bases | Magic Boxes | Self-contained Sheaves | Big Boat Sheaves | High-Load Sheaves | Narrow Halyard & Streering Sheaves | ESP Deck Organizers | Small Boat Deck Organizers | Midrange Deck Organizers | Big Boat Deck Organizers | Spinnaker Pole Cars & End Fittings | Stay Tensioners | Eyestraps | Padeyes | Stainless Steel Shackles | LOUPS | Accessories | Storage Systems

Complementary Hardware > Stand-up Bases

Stand-up bases allow a wide variety of blocks to be held upright, swivel freely and pivot for fair leads under load.

Ball and Socket Swivel Bases

The ball and socket design allows blocks to swivel freely and pivot to a 45° angle. Bases may be fitted with springs but block won't hit the deck without them. Select blocks carefully as the maximum working load of either base is often less than corresponding blocks.

Stanchion Mount Base

The 061 stanchion mount base attaches blocks to 7/8" or 1" (22 or 25 mm) stanchions or pulpits and is often used to lead furling lines to the cockpit. Allows blocks to swivel and pivot for fair leads.

Mid-Range Stand-up

Use the 1573 Stand-up base with Mid-Range blocks. The low profile design is ideal as a mast base halyard lead block. Combine the 1573 with single Mid-Range ratchet or Fiddle blocks. Doubles and triples will fit the 1573, but their safe working loads are higher than the base.

Use for:

Ball & Socket Bases

  • Dinghy mainsheets
    Stanchion Mount Base
  • Lead furling lines aft
  • Light air spinnaker sheets
  • Flag halyards
    Mid-Range Stand-up
  • Mast base halyard lead blocks
    1573
    1573
  • Accepts a variety of blocks
  • Blocks will not hit deck
  • Low profile design
  • Swivels and pivots freely
  • Mid-Range block stand up base
  • stand-up bases
    010
    010
    029
    061
    061
    Part No. Description Height Weight Base Inside socket Pin Safe working load Breaking strength Use with
    inmmozginmminmminmmIbkgIbkg
    010Ball/socket *13/44438521/8543/8103/16540018113005902.257Little Fiddle/ratchets
    029Large ball/socket *251411321/8547/16121/464001811300590Fiddle/3.00" cruiser/ratchets
    061Stanchion mount11/4322573/8103/165350159Bullet/Big Bullet/2.25"/ratchets
    1573Midrange stand-up **115/1649719827/8739/16155/168180081650002267Midrange blocks

    * - #10 (5 mm) FH fastener
    ** - 1/4" (6 mm) FH fastener

    Ball Bearing Cam Cleats | Cam Cleat Accessories | Cam Bases | Trigger Cleat | Trigger Cleat Swivel Base | Stand-up Bases | Magic Boxes | Self-contained Sheaves | Big Boat Sheaves | High-Load Sheaves | Narrow Halyard & Streering Sheaves | ESP Deck Organizers | Small Boat Deck Organizers | Midrange Deck Organizers | Big Boat Deck Organizers | Spinnaker Pole Cars & End Fittings | Stay Tensioners | Eyestraps | Padeyes | Stainless Steel Shackles | LOUPS | Accessories | Storage Systems

  • Error processing SSI file