Travelers | Use chart | Curved Track | Micro CB Cars | Micro CB Track & Accessories | Small Boat CB Cars | Small Boat End Controls | Small Boat CB Track & Accessories | Midrange Cars & Controls | Midrange Controls | Midrange CB Track & Accessories | Big Boat Cars | Big Boat Car Couplers | Traveler Kit, Track Risers & Dodger Blocks | Big Boat Car Controls | Big Boat Controls | High-Load Controls | Big Boat Track & Accessories | Mini-Maxi & Maxi Cars | Mini-Maxi & Maxi Track & Controls | Windward Sheeting Cars | CRX Roller Traveler | Dinghy Pinstop Jib Leads | Small Boat Pinstop Jib Leads | Ball Bearing Adjustable Genoa Lead Cars | Slider & T-Track Genoa Lead Cars | T-Track Genoa Lead Cars & Slides | Aluminum & Stainless Steel T-Track
Travelers > Micro CB Track & Accessories
Our low-profile Micro CB track is fully-saturated, Hardkote-anodized for maximum durability and scratch-resistance. The wide track base protects cored decks and adds stability to the track. An indent on the bottom profile makes the track easy to install on curved surfaces (such as booms) without rocking. Fastener holes fit both metric and imperial screw sizes.
Control blocks are lightweight 16 mm AirBlocks® spinning on stainless steel balls that roll freely under high loads. The step-down design of the control blocks and tangs nests the controls low to keep them clear of the mainsheet block.
Our line-shedding endstop is low-profile and snag-free. A groove running under the stop provides a dead end for 2:1 line controls. The endstop's super-tough plastic construction will absorb sudden shock loads that can occur during unintentional jibes.
 |
|
 2704 |
 2705 |
 2706 |
|
 |
 2707 |
||||||||||||
Accessories
| Part No. | Description | Length | Weight each | Height above track | Max line  |
Safe working load | Breaking strength | — | ||||||
| in | mm | oz | g | in | mm | in | mm | Ib | kg | Ib | kg | Purchase | ||
| 2704 | Control block (pair) | 15/16 | 33 | 3/8 | 11 | 3/4 | 19 | 7/32 | 5 | 250 | 113 | 750 | 339 | 2:1 |
| 2705 | Control tang (pair) | 13/16 | 21 | 1/8 | 3 | 11/16 | 17 | — | — | 250 | 113 | 750 | 339 | 1:1 |
| 2706 | Micro endstop (pair) | 11/16 | 27 | 1/8 | 3 | 1/8 | 3 | — | — | 250 | 113 | 750 | 339 | — |
Track
| Part No. | Description | Length | Hole spacing* | Weight | Fasteners (FH) | ||||
| ft | m | in | mm | oz | g | ||||
| 2707.600mm | Low-beam | 1.97 | 0.6 | 131/32 | 50 | 49/16 | 129 | #8 | 4 mm |
| 2707.1m | Low-beam | 3.28 | 1.0 | 131/32 | 50 | 79/16 | 214 | #8 | 4 mm |
| 2707.2m | Low-beam | 6.56 | 2.0 | 131/32 | 50 | 151/8 | 429 | #8 | 4 mm |
* - 1st hole 1" (25 mm)
Travelers | Use chart | Curved Track | Micro CB Cars | Micro CB Track & Accessories | Small Boat CB Cars | Small Boat End Controls | Small Boat CB Track & Accessories | Midrange Cars & Controls | Midrange Controls | Midrange CB Track & Accessories | Big Boat Cars | Big Boat Car Couplers | Traveler Kit, Track Risers & Dodger Blocks | Big Boat Car Controls | Big Boat Controls | High-Load Controls | Big Boat Track & Accessories | Mini-Maxi & Maxi Cars | Mini-Maxi & Maxi Track & Controls | Windward Sheeting Cars | CRX Roller Traveler | Dinghy Pinstop Jib Leads | Small Boat Pinstop Jib Leads | Ball Bearing Adjustable Genoa Lead Cars | Slider & T-Track Genoa Lead Cars | T-Track Genoa Lead Cars & Slides | Aluminum & Stainless Steel T-Track