Системы закрутки для малых яхт | Подспинакерник и генакер | Закрутки для кода 0 | Система закрутки и рифления генуи Юнит 00AL | Система закрутки и рифления генуи MKIII | Определение размеров элементов систем закрутки | Система закрутки и рифления генуи из карбона | Гидравлическая система закрутки и рифления генуи MKIII | Дополнительное оборудование
Furling Systems > Unit 00AL Jib Reefing & Furling
Unit OOAL is the perfect jib reefing and furling system for small cruising boats under 26' (8 m). It combines most of the features of larger Harken furling systems in a simpler unit. Like other Harken systems, the main components of the 00AL are 6061-T6 Hardkote-anodized aluminum with Teflon® impregnation.Features include a free-spinning, omnidirectional bearing system with multiple ball bearing races, a double grooved foil for racing sail changes, and a lightweight halyard swivel to minimize windage and weight aloft. The furler's large inside spool provides plenty of mechanical advantage for smooth, easy reefing and furling.
There are enough aluminum foil sections to build a headstay with a pin-to-pin measurement to 31 '6" (9.60 m). Harken offers an additional foil and connector to extend headstay length to 35' (10.7 m).
Note: you must cut your headstay to install 00AL furling. You must also purchase a Harken clevis pin to match your chainplate.
How To Order
1. Choose unit based on boat length and wire or rod diameter.
2. Measure headstay from center of pin at masthead toggle, to center of pin at stemhead chainplate.
3. Choose accessories to complete system.
4. Select clevis pin to fit your chainplate (see chart).
5. Ask your sailmaker to add #6, 6/32", 5 mm luff tape to your genoa. Consider a leech cover to protect your furled sail from UV rays.
Note: Because Harken uses sectional aluminum foils, you must cut the headstay for installation. Typically the top of the headstay is cut and a new eye installed. Purchase standard swage or mechanical eyes from a rigging outlet.
 |
|
Unit 00AL
Typical Boat Length 20' - 26' (6 - 8 m)
Wire  (1 x 19 SS) | Rod | Clevis Pin | |
| 1/8", 5/32", 3/16"(3, 4, 5 mm) | -4, 4.37 mm | 1/4", 5/16", 3/8", 7/16" (6, 8, 9.5, 11 mm) | |
| Headstay Length Standard 31 '6" 0.60 m); max 35' (10.67 m) | |||
| Part No. | Description | ||
| 1110 | Furling system | ||
| Clevis Pin Assembly Required - sold separately | |||
| 1106 | 1/4" (6 mm) | ||
| 1107 | 5/16" (8 mm) | ||
| 1108 | 3/8" (9.5 mm) | ||
| 1109 | 7/16" (11 mm) | ||
| Optional Parts | |||
| 909 | Extra 6" (152 mm) connector | ||
| 1112 | Extra 3.5' (1.07m) foil extrusion | ||
| 266 | Lead block kit: 3 x166/1 x 019/4 x 061/1 cleat | ||
| 884 | Snap shackle for tack/head (each shackle) | ||
| 061 | Stanchion mount base | ||
| 944 | Halyard restrainer (use only when required) | ||
Системы закрутки для малых яхт | Подспинакерник и генакер | Закрутки для кода 0 | Система закрутки и рифления генуи Юнит 00AL | Система закрутки и рифления генуи MKIII | Определение размеров элементов систем закрутки | Система закрутки и рифления генуи из карбона | Гидравлическая система закрутки и рифления генуи MKIII | Дополнительное оборудование