Ñèñòåìû ñ øàðèêîâûìè êàðåòêàìè ëàò | Çàêàç ëàò-êàðåòîê | Ñèñòåìà À | Ñèñòåìà Á | Ñèñòåìà Â | Êàðåòêè øêîòîòâîãî óãëà äëÿ ãðîòîâ ñ çàêðóòêîé | Ñèñòåìû âçÿòèÿ ðèôîâ ñ îäíèì õîäîâûì êîíöîì è ïîääåðæêà ãèêà

Mainsail Handling Systems > System C

System-C batten travelers are designed for monohulls with mainsails of less than 1400 ft² (130 m²) or multihulls with less than 1200 ft² (111 m²). Custom or modified systems are available for larger boats.

1782

1785 1827

1795 1829 1828 1903

Dimensions

Part No.	A		B		C		D		E Pin /Locknut size
	in	mm	in	mm	in	mm	in	mm	in	mm
1782	113/16	284	21/16	53	45/8	117	10	254	1/2/—	12.77—
1785	4	102	25/16	59	211/16	68	11/8	29	5/16 /—	8/—
1795	43/4	121	25/16	59	33/8	86	83/4	222	— /3/8 - 9.5*	—
1827	43/4	121	25/16	59	211/16	68	—	—	5/16 /—	8/—
1828	43/4	121	23/16	55	41/16	104	91/2	241	5/16/—	8/—
1829	43/4	121	23/16	55	41/16	104	63/8	162	5/16 /—	8/—
1903	43/4	121	25/16	59	33/16	81	12	305	3/8/—	9.5 /—

^{* - Use locknuts}

Maximum boat length		Maximum sail area				System
		Monohull		Multihull
ft	m	ft2	m2	ft2	m2
80	24	1400	130	1200	111	C

1782

Headboard Cars

Part No.	Description	Weight		Width		Max headboard thickness		Safe working load		Track
		oz	g	in	mm	in	mm	Ib	kg
1782	Headboard car assembly/headboard	72	2040	35/16	84	11/16	17	4200	1905	1816/1847/758

See this page for replacement balls

1785 1785HL

1828

1795

1829

1827

1903

Cars

Part No.	Description	Weight		Width		Max batten Width/		Batten	Safe working load		Track
						Width/
		oz	g	in	mm	in	mm		Ib	kg
1785	Ball bearing luff car**	15	425	35/16	84	—	—	—	1050	476	1816/1847/758
1795	Battcar/adjustable Battslide®	33	936	35/16	84	3/4	19	Round	1350	612	1816/1847/758
1827	Battcar/12 mm stud	28	794	35/16	84	—	—	—	1350	612	1816/1847/758
1828	Battcar/pivoting adjustable Battslide®	34	964	35/16	84	3/4	19	Round	1350	612	1816/1847/758
1829	Battcar/pivoting Mega Battslide®	31	879	35/16	84	31/8*	80	Flat	1350	612	1816/1847/758
1903	Battcar/pivoting adjustable Battslide®	42	1200	35/16	84	1	25	Round	1350	612	1816/1847/758

* - Batten wider than 2¹/₂ (64 mm) require tapering.
** - 1785 Available in high-load for larger for larger mainsails. Add HL to part number
See this page for replacement balls

1816	Mast Cross Section 1819 Fits flat mast grooves with a gap of 7/16" (11 mm) to 5/8" (16 mm).

Track

Part No.	Description	Length		Weight		Fastener spacing		Fastening method
		in	m	oz/ft	g/m	in	mm
1816	Track	8115/16	2.08	9.38	874	315/16	100	Slugs
758/1847	Use Big Boat track. See this page to order.							Drilling and tapping

1817 1818 1819

1820 1821

1822

Mounting Kits

Part No.	Description	Mounting slug				Mounting slugs/kit	Connector slug				Connector slugs/kit	Kit includes	Order
		Length		Weight			Length		Weight
		in	mm	oz	g		in	mm	oz	g
1817	Shallow round mast groove*	1	25	1/3	10	19	41/8	105	15/8	46	1	Slugs/fasteners/ Loctite®	One kit per length of 181 6 track
1818	Deep round mast groove*	1	25	1/3	10	19	41/8	105	15/8	46	1
1819	Flat mast groove*	1	25	1/2	16	19	41/8	105	21/3	66	1

* - M8 x 1.25 x 40 mm fasteners

Endstop Kit

Part No.	Description	Mounting slug				Mounting slugs/kit	Connector slug				Connector slugs/kit	Kit includes	Order
		Length		Weight			Length		Weight
		in	mm	oz	g		in	mm	oz	g
1820	Shallow round mast groove*	2	51	3/4	20	2	—	—	—	—	—	Slugs/fasteners/ Loctite®/pair 548 endstops	One kit per mast for 181 6 track
1821	Deep round mast groove*	2	51	3/4	20	2	—	—	—	—	—
1822	Flat mast groove*	2	51	1	30	2	—	—	—	—	—

* - M8 x 1.25 x 40 mm fasteners

Ñèñòåìû ñ øàðèêîâûìè êàðåòêàìè ëàò | Çàêàç ëàò-êàðåòîê | Ñèñòåìà À | Ñèñòåìà Á | Ñèñòåìà Â | Êàðåòêè øêîòîòâîãî óãëà äëÿ ãðîòîâ ñ çàêðóòêîé | Ñèñòåìû âçÿòèÿ ðèôîâ ñ îäíèì õîäîâûì êîíöîì è ïîääåðæêà ãèêà