Use Chart | Standart | One-, Two-, & Three Speed | Self-Tailing | Three-Speed Self-Tailing | Wide-Body Self-Tailing | Stainless Steel | Powered | Electric | Hydraulic | Hydraulic Power Units | Control Boxes Circuit Breakers, & Switches | Racing Features | Quattro | Two-Speed Self-Tailing Racing | Three-Speed & Three- Speed Self-Tailing Racing | Wide-Body Three-Speed Top-Cleating Racing | Large Wide-Body Multi- Speed Racing | Large Wide-Body Self- Tailing Racing | Pedestals & Accessories | Drive Components | 2003 AC Winch Systems | SeepdGrip Handles | Ball Bearing Handles | Service Kits

Winches > Large Wide-Body Multi-Speed Racing

Large wide-body racing winches are used primarily in pedestal-driven, high-load applications. All of these winches have three speeds and the 1110 series is also available as a four-speed. The 1110 winch was originally developed as the America's Cup primary but the IMS-legal version, listed here, has been used successfully as the primary winch on top rated Maxi-boats.

The winches all have a cleat built into the center of the drum to secure the line. They utilize 17-4 PH gears for superior strength, alloy housings for light weight, and PEEK^ฎ drum roller bearings for low maintenance and high efficiency.

First gear is selected by pressing a button on top in the center of the drum. The winch then auto-shifts from first to second to third on successive crank direction of rotation changes. On four-speed models, a knob on the base selects between the upwind mode where the winch auto shifts from first to third to fourth, and the downwind mode where the winch is locked into second and third gears. This is very useful when trimming large spinnakers.

Use For:

Control lines

B1110.3TCR

Pedestal driven for speed and power Wide drum retrieves sheet quickly Lightweight

Ordering Information:

Specify winch drum material by adding A (aluminum) or A/SS (aluminum/stainless steel) to the part number. For pedestal drive add PD to the part number.

B1120TCR

Part No.

Gear ratio

Power ratio 10" (254 mm) crank

Power ratio 9" (228 mm) crank

Fastener circle

Fasteners

1

2

3

4

1

2

3

4

1

2

3

in

mm

in

mm

B1110.3TCR

1:1

9.43:1

43.6:1

—

1.85:1

17.4:1

80.7:1

—

—

—

—

1045/64

272

8 x 3/8 HH

8 x 8 HH

B1110.4TCR

1:1

3.17:1

9.43:1

43.6:1

1.85:1

5.87:1

17.4:1

80.7:1

—

—

—

1045/64

272

8 x 3/8 HH

8 x 8 HH

B1120TCR

2:1

11.4:1

44.9:1

—

3.4:1

19.3:1

76:1

—

—

—

—

143/8

365

12 x 3/8 HH

12 x 10 HH

Part No.

Drum

Base

Height

Weight

Line

Line entry height (LE)

w/sheave

w/o sheave

Aluminum

Alum/SS

Alum/Carbon

Min

Max

in

mm

in

mm

in

mm

in

mm

Ib

kg

Ib

kg

Ib

kg

in

mm

in

mm

in

mm

B1110.3TCR

1013/16

275

—

—

131/2

342

739/64

192

46

20

—

—

—

—

—

—

—

—

35/16

84

B1110.4TCR

1013/16

275

—

—

131/2

342

739/64

192

46

20

—

—

—

—

—

—

—

—

35/16

84

B1120TCR

1113/16

300

—

—

163/4

425

143/8

365

83.1

37.7

97

44

—

—

—

—

—

—

57/8

150

Use Chart | Standart | One-, Two-, & Three Speed | Self-Tailing | Three-Speed Self-Tailing | Wide-Body Self-Tailing | Stainless Steel | Powered | Electric | Hydraulic | Hydraulic Power Units | Control Boxes Circuit Breakers, & Switches | Racing Features | Quattro | Two-Speed Self-Tailing Racing | Three-Speed & Three- Speed Self-Tailing Racing | Wide-Body Three-Speed Top-Cleating Racing | Large Wide-Body Multi- Speed Racing | Large Wide-Body Self- Tailing Racing | Pedestals & Accessories | Drive Components | 2003 AC Winch Systems | SeepdGrip Handles | Ball Bearing Handles | Service Kits