Use Chart | Standart | One-, Two-, & Three Speed | Self-Tailing | Three-Speed Self-Tailing | Wide-Body Self-Tailing | Stainless Steel | Powered | Electric | Hydraulic | Hydraulic Power Units | Control Boxes Circuit Breakers, & Switches | Racing Features | Quattro | Two-Speed Self-Tailing Racing | Three-Speed & Three- Speed Self-Tailing Racing | Wide-Body Three-Speed Top-Cleating Racing | Large Wide-Body Multi- Speed Racing | Large Wide-Body Self- Tailing Racing | Pedestals & Accessories | Drive Components | 2003 AC Winch Systems | SeepdGrip Handles | Ball Bearing Handles | Service Kits
Winches > Large Wide-Body Self-Tailing Racing
Large wide-body self-tailing racing winches are used primarily in pedestal-driven, high-load applications. The 1110 winch was originally developed for the America's Cup mainsheet but the IMS-legal version, listed here, has been used successfully as a mainsheet winch on top rated Maxi-boats.
Self-tailing winches feature "super holding" composite jaws, and one-piece sculpted line guide and peeler.
They utilize 17-4 PH gears for superior strength, alloy housings for light weight, and PEEK® drum roller bearings for low maintenance and high efficiency.
First gear is selected by pressing a button on top in the center of the drum. The winch then auto-shifts from first to second to third on successive crank direction of rotation changes. On four-speed models, a knob on the base selects between the upwind mode where the winch auto shifts from first to third to fourth, and the downwind mode where the winch locks into second and third gears. This is very useful when trimming large spinnakers.
Use For:
 B990.3STR |
|
Ordering Information:
Specify winch drum material by adding A (aluminum) or A/SS (aluminum/stainless steel) to the part number. For pedestal drive add PD to the part number.
 B880.2STR B880.3STBD B880.3STR |
 B1110.4STR |
 B1120.3STR |
| Part No. | Gear ratio | Power ratio | Fastener circle | Fasteners | ||||||||
| 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 | in | mm | in | mm | |
| B560.3STR | 2.2:1 | 5:1 | 16.1:1 | | 7.4:1 | 16.2:1 | 55:1 | | 711/16 | 195 | 6 x 5/16 FH | 6 x 8 FH |
| B880.2STR | 9.9:1 | 40.1:1 | | | 20:1 | 80:1 | | | 1023/32 | 272 | 8 x 5/16 FH | 8 x 8 FH |
| B880.3STR | 2.5:1 | 9.9:1 | 40.1:1 | | 5:1 | 20:1 | 80:1 | | 1023/32 | 272 | 8 x 5/16 FH | 8 x 8 FH |
| B980.3LPSTR | 2.8:1 | 7.3:1 | 27.8:1 | | 8:1 | 21:1 | 80:1 | | 87/8 | 225 | 6 x 3/8 FH | 6 x 10 FH |
| B990.3STR | 1:1 | 9.9:1 | 40:1 | | 2.5:1 | 24.9:1 | 100.27:1 | | 12 | 305 | 8 x 5/16 FH | 8 x 8 FH |
| B1110.3STR | 1:1 | 9.43:1 | 43.6:1 | | 1.85:1 | 17.4:1 | 80.7:1 | | 1023/32 | 272 | 8 x 5/16 HH | 8 x 8 HH |
| B1110.4STR | 1:1 | 3.17:1 | 9.43:1 | 43.6:1 | 1.85:1 | 5.87:1 | 17.4:1 | 80.7:1 | 1023/32 | 272 | 8 x 5/16 HH | 8 x 8 HH |
| B1120.3STR | 2:1 | 11.4:1 | 44.9:1 | | 3.4:1 | 19.3:1 | 76:1 | | 143/8 | 365 | 12 x 3/8 HH | 12 x 10 HH |
| Part No. |  |
Height | Weight | Line |
Line entry height (LE) | |||||||||||
| Drum | Base | Aluminum | Alum/SS | Min | Max | |||||||||||
| in | mm | in | mm | in mm | Ib | kg | Ib | kg | in | mm | in | mm | in | mm | ||
| B560.3STR | 57/8 | 150 | 87/8 | 225 | 105/8 | 270 | 31.5 | 14.3 | 29.3 | 13.3 | 5/16 | 8 | 5/8 | 16 | 415/16 | 125 |
| B880.2STR | 103/32 | 256 | 131/2 | 342 | 85/16 | 210 | 35.2 | 16 | | | 3/8 | 10 | 3/4 | 19 | 213/32 | 60 |
| B880.3STR | 103/32 | 256 | 131/2 | 342 | 85/16 | 210 | 36.3 | 16.5 | | | 3/8 | 10 | 3/4 | 19 | 213/32 | 60 |
| B980.3LPSTR | 67/8 | 175 | 107/16 | 265 | 117/8 | 300 | 40.8 | 18.5 | | | 3/8 | 10 | 13/16 | 20 | 57/8 | 150 |
| B990.3STR | 8 | 203 | 1013/16 | 274 | 913/32 | 240 | 41.2 | 18.7 | | | 7/16 | 11 | 3/4 | 19 | 31/2 | 89 |
| B1110.3STR | 1013/16 | 275 | 157/16 | 392 | 95/16 | 236 | 52.8 | 23.9 | | | 5/8 | 16 | 7/8 | 22 | 35/16 | 84 |
| B1110.4STR | 1013/16 | 275 | 157/16 | 392 | 95/16 | 236 | 52.8 | 23.9 | | | 5/8 | 16 | 7/8 | 22 | 35/16 | 84 |
| B1120.3STR | 1113/16 | 300 | 163/4 | 425 | 143/8 | 365 | 92.5 | 43.2 | 110.7 | 50.2 | 5/8 | 16 | 1 | 25 | 57/8 | 150 |
Use Chart | Standart | One-, Two-, & Three Speed | Self-Tailing | Three-Speed Self-Tailing | Wide-Body Self-Tailing | Stainless Steel | Powered | Electric | Hydraulic | Hydraulic Power Units | Control Boxes Circuit Breakers, & Switches | Racing Features | Quattro | Two-Speed Self-Tailing Racing | Three-Speed & Three- Speed Self-Tailing Racing | Wide-Body Three-Speed Top-Cleating Racing | Large Wide-Body Multi- Speed Racing | Large Wide-Body Self- Tailing Racing | Pedestals & Accessories | Drive Components | 2003 AC Winch Systems | SeepdGrip Handles | Ball Bearing Handles | Service Kits