Error processing SSI file

Use Chart | Standart | One-, Two-, & Three Speed | Self-Tailing | Three-Speed Self-Tailing | Wide-Body Self-Tailing | Stainless Steel | Powered | Electric | Hydraulic | Hydraulic Power Units | Control Boxes Circuit Breakers, & Switches | Racing Features | Quattro | Two-Speed Self-Tailing Racing | Three-Speed & Three- Speed Self-Tailing Racing | Wide-Body Three-Speed Top-Cleating Racing | Large Wide-Body Multi- Speed Racing | Large Wide-Body Self- Tailing Racing | Pedestals & Accessories | Drive Components | 2003 AC Winch Systems | SeepdGrip Handles | Ball Bearing Handles | Service Kits

Winches > Self-Tailing

Self-tailing winches are ideal for sheets, halyards, and control lines on racing and cruising boats. The self-tailing mechanism means that one crew member can quickly and easily trim or raise sails.

The B16ST is a one-speed winch. The handle drives in one direction and ratchets in the other to facilitate cranking under high loads. All others are two-speed self-tailing winches.

All have our "super holding" composite jaws and one-piece sculpted line guide and peeler.

Use For:

  • Halyards
  • Sheets
  • Control lines

    B48.2STA
  • One-piece self-tailing arm for easy maintenance
  • Easy, one-person operation
  • Hold a variety of line sizes

    • Ordering Information:

    Specify winch drum material by adding A (aluminum), B (polished bronze), or C (chromed bronze) to part number. Polished bronze by special order only.

    B16STA
    B32.2STC
    B40.2STA
    B46.2STC
    Part No. Gear ratio Power ratio Fastener circle Fasteners (FH)
    1212inmminmm
    B16ST2.3:1—16:1—39/16905 x 1/45x6
    B32.2ST2.4:14.7:116:132:141/81055 x 1/45x6
    B40.2ST2.2:16:113.5:140:147/161125 x 1/45x6
    B44.2ST2.5:18.2:113.8:144:151/161285 x 5/165x8
    B46.2ST2.5:19.2:113:146:151/21405 x 5/165x8
    B48.2ST2.5:110:112:148:161/81556 x 5/166x8
    B53.2ST3:112:113:153:171/161806 x 5/166x8
    B56.2ST5:113:121:156:1711/161956 x 5/166x8
    B64.2ST5.7:116.5:122.5:164:181/42105 x 3/85x10
    B66.2ST7.3:120:125:166:187/82256 x 3/86x10
    B74.2ST7.3:122:125:174:187/82256 x 3/86x10

    Part No. Height Weight Line Line entry height (LE)
    Drum Base Aluminum Chrome Min Max
    inmminmminmmIbkgIbkginmminmminmm
    B16ST23/47043/412059/1614273.28.53.91/461/212250
    B32.2ST215/167453/813667/161649.34.211.95.45/1681/21223/470
    B40.2ST37657/8150615/1617610.64.814.16.45/1681/21223/470
    B44.2ST35/892611/1617073/419615.97.220.19.15/1689/161433/885
    B46.2ST315/1610067/817585/1621018.68.423.610.75/1689/161439/1690
    B48.2ST410271/219083/422223.110.528.512.95/1689/1614315/16100
    B53.2ST47/16112811/16220911/1624528.713.136.116.45/1689/161443/16105
    B56.2ST43/412087/8225105/827033.815.341.518.85/1685/816415/16125
    B64.2ST51/813095/8245121/830845.220.559.5275/1683/41857/8150
    B66.2ST57/8150107/162651113/1630059.326.969.631.53/81013/162157/8150
    B74.2ST57/8150107/162651113/163006027.271.432.33/81013/162157/8150

    Use Chart | Standart | One-, Two-, & Three Speed | Self-Tailing | Three-Speed Self-Tailing | Wide-Body Self-Tailing | Stainless Steel | Powered | Electric | Hydraulic | Hydraulic Power Units | Control Boxes Circuit Breakers, & Switches | Racing Features | Quattro | Two-Speed Self-Tailing Racing | Three-Speed & Three- Speed Self-Tailing Racing | Wide-Body Three-Speed Top-Cleating Racing | Large Wide-Body Multi- Speed Racing | Large Wide-Body Self- Tailing Racing | Pedestals & Accessories | Drive Components | 2003 AC Winch Systems | SeepdGrip Handles | Ball Bearing Handles | Service Kits

    • Error processing SSI file